At+Qmostat Show State Of Mobile Originated Call; At+Qiurc Enable Or Disable Initial Urc Presentation - Quectel M35 Command Manual

4.4. AT+QMOSTAT Show State of Mobile Originated Call

AT+QMOSTAT Show State of Mobile Originated Call
Test Command
AT+QMOSTAT=?
Read Command
AT+QMOSTAT?
Write Command
AT+QMOSTAT=<mode>
Reference
Parameter
<mode> 0
1
Example
AT+QMOSTAT=1
OK
ATD10086;
OK
MO RING
MO CONNECTED

4.5. AT+QIURC Enable or Disable Initial URC Presentation

AT+QIURC Enable or Disable Initial URC Presentation
Test Command
AT+QIURC=?
M35_AT_Commands_Manual
Response
+QMOSTAT: (list of supported <mode>s)
OK
Response
+QMOSTAT: <mode>
OK
Response
OK
ERROR
Do not show call state of mobile originated call
Show call state of mobile originated call. After dialing call numbers, the URC
strings of MO RING will be sent if the other call side is alerted and the URC strings
of MO CONNECTED will be sent if the call is established
Response
+QIURC: (list of supported <mode>s)
// Show call state of mobile originated call
// The other call side is alerted
// The call is established
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
41 / 186