Quectel M35 Command Manual page 151

Write Command
AT+QPING="<host>"[,[<timeout>][,<p
ingnum>]]
Reference
Parameter
<host> The host address in string style. It could be a domain name or a dotted decimal IP address
<timeout> A numeric gives the maximum time to wait for the response of each ping request. Unit:
second. Range: 1-255. Default: 1
<pingnum> A numeric indicates the maximum time of ping request. Range: 1-10. Default: 4
<result> The result of each ping request
0
1
<ipAddr> The IP address of the remote server. It is a dotted decimal IP
<bytes> The length of sending each ping request
<time> The time expended to wait for the response for the ping request. Unit: ms
<ttl> The value of time to live of the response packet for the ping request
<finresult> The final result of the command
2
3
4
5
<sent> Total number of sending the ping requests
<rcvd> Total number of the ping requests that received the response
<lost> Total number of the ping requests that were timeout
<min> The minimum response time. Unit: ms
<max> The maximum response time. Unit: ms
<avg> The average response time. Unit: ms
M35_AT_Commands_Manual
OK
Response
OK
[+QPING:
<result>[,<ipAddr>,<bytes>,<time>,<ttl>]<CR><LF>
...]<CR><LF>
+QPING:<finresult>[,<sent>,<rcvd>,<lost>,<min>,<max>,
<avg>]
ERROR
Received the ping response from the server. In the case, it is followed by
",<ipAddr>,<bytes>,<time>,<ttl>"
Timeout for the ping request. In the case, no other information follows it
It is finished normally. It is successful to activate GPRS and find the host. In the
case, it is followed by ",<sent>,<rcvd>,<lost>,<min>,<max>,<avg>"
The TCP/IP stack is busy now. In the case, no other information follows it
Do NOT find the host. In the case, no other information follows it
Failed to activate PDP context. In the case, no other information follows it
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
151 / 186