At+Csq Signal Quality Report - Quectel M35 Command Manual

OK
+CREG: 1
AT+CREG=2
OK
+CREG: 1,"1878","0873"

6.3. AT+CSQ Signal Quality Report

AT+CSQ Signal Quality Report
Test Command
AT+CSQ=?
Execution Command
AT+CSQ
Reference
GSM 07.07
Parameter
<rssi> 0
1
2...30
31
99
<ber> (in percent):
0...7
99
Example
AT+CSQ=?
M35_AT_Commands_Manual
Response
+CSQ: (list of supported <rssi>s),(list of supported <ber>s)
OK
Response
+CSQ: <rssi>,<ber>
OK
+CME ERROR: <err>
Execution Command returns received signal strength
indication <rssi> and channel bit error rate <ber> from the
ME. Test Command returns values supported by the TA.
-113 dBm or less
-111 dBm
-109... -53 dBm
-51 dBm or greater
Not known or not detectable
As RXQUAL values in the table in GSM 05.08 subclause 8.2.4
Not known or not detectable
// URC reports that operator has been found
// Activates extended URC mode
// URC reports that operator has been found with location
area code and cell ID
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
59 / 186