At+Crc Set Cellular Result Codes For Incoming Call Indication - Quectel M35 Command Manual

REL ASYNC Asynchronous non-transparent
REL SYNC Synchronous non-transparent
NOTE
Intermediate result code:
If it is enabled, an intermediate result code is transmitted at the point during connect negotiation at which
the TA has determined which speed and quality of service will be used, before any error control or data
compression reports are transmitted, and before any final result code (e.g. CONNECT) is transmitted.

7.17. AT+CRC Set Cellular Result Codes for Incoming Call Indication

AT+CRC Set Cellular Result Codes for Incoming Call Indication
Test Command
AT+CRC=?
Read Command
AT+CRC?
Write Command
AT+CRC=[<mode>]
Reference
GSM 07.07
Parameter
<mode> 0
1
NOTE
Unsolicited result code:
When it is enabled, an incoming call is indicated to the TE with unsolicited result code +CRING: <type>
instead of the normal RING.
Parameter
<type> ASYNC
M35_AT_Commands_Manual
Response
+CRC: (list of supported <mode>s)
OK
Response
+CRC: <mode>
OK
Response
TA controls whether or not the extended format of incoming
call indication is used.
OK
Disable extended format
Enable extended format
Asynchronous transparent
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
75 / 186