At+Qiprompt Set Prompt Of „>" When Sending Data; At+Qiserver Configure As Server - Quectel M35 Command Manual

0
1
<time> A numeric parameter which indicates a time in seconds
After the time expires since AT+QISEND, the input data will be sent automatically
11.17. AT+QIPROMPT Set Prompt of „>‟ when Sending Data
AT+QIPROMPT Set Prompt of „>‟ when Sending Data
Test Command
AT+QIPROMPT=?
Read Command
AT+QIPROMPT?
Write Command
AT+QIPROMPT=<send prompt>
Reference
Parameter
<send prompt>

11.18. AT+QISERVER Configure as Server

AT+QISERVER Configure as Server
Test Command
AT+QISERVER=?
Read Command
AT+QISERVER?
M35_AT_Commands_Manual
DO Not set timer for data sending
Set timer for data sending
Response
+QIPROMPT: (list of supported <send prompt>s)
OK
Response
+QIPROMPT: <send prompt>
OK
Response
OK
ERROR
A numeric parameter which indicates whether or not to echo prompt ">" after
issuing AT+QISEND Command
0 No prompt ">" and show "SEND OK" when sending successes
1 Echo prompt ">" and show "SEND OK" when sending successes
2 No prompt and not show "SEND OK" when sending successes
3 Echo prompt ">" and show "socket ID" "SEND OK" when sending
successes
Response
OK
Response
+QISERVER: <mode>, <num>
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
137 / 186