At+Qindi Set The Method To Handle Received Tcp/Ip Data - Quectel M35 Command Manual

Parameter
<n> The index for querying the connection
<sent> A numeric indicates the total length of the data that has been sent through the session
<acked> A numeric indicates the total length of the data that has been acknowledged by the remote
<nAcked> A numeric indicates the total length of the data that has been sent but not acknowledged by
the remote
NOTES
1. This command is invalid when QIMUX was set as 0 by the command AT+QIMUX=0.
2. This command could be affected by the command AT+QISRVC. If the QISRVC was set as 1, this
command is used to query the information of sending data during the session in which M35 serves as
a client. If the QISRVC was set as 2, this command is used to query the data information for sending
during the session in which M35 serves as a server.

11.30. AT+QINDI Set the Method to Handle Received TCP/IP Data

AT+QINDI Set the Method to Handle Received TCP/IP Data
Test Command
AT+QINDI=?
Read Command
AT+QINDI?
Write Command
AT+QINDI=<m>
Reference
Parameter
<m> A numeric indicates how the mode handles the received data
0
1
M35_AT_Commands_Manual
Response
+QINDI: (list of supported <m>s)
OK
Response
+QINDI: <m>
OK
Response
OK
ERROR
Output the received data through UART directly. In the case, it probably includes
header at the beginning of a received data packet. Please refer to the commands.
AT+QIHEAD,AT+QISHOWRA, AT+QISHOWPT,AT+QISHOWLA
Output a notification statement "+QIRDI: <id>,<sc>,<sid>" through UART. This
statement will be displayed only one time until all the received data from the
connection (defined by <id>,<sc>,<sid>) has been retrieved by the command
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
148 / 186