NOTE
CSD configuration is not supported at present.
11.20. AT+QISRVC Choose Connection
AT+QISRVC Choose Connection
Test Command
AT+QISRVC=?
Read Command
AT+QISRVC?
Write Command
AT+QISRVC=<connection>
Reference
Parameter
<connection>
A numeric parameter which indicates the chosen connection
1
2
NOTE
There could be two connections at one time: one connection is that MS connects with a remote server as
a client; the other connection is that MS accepts a remote client as a server. Using this Command to
specify which connection data will be sent through.
11.21. AT+QISHOWRA Set Whether or not to Display the Address of
Sender
AT+QISHOWRA Set Whether or not to Display the Address of Sender
M35_AT_Commands_Manual
Response
+QISRVC: (list of supported <connection>s)
OK
Response
+QISRVC: <connection>
OK
Response
OK
ERROR
Choose the connection in which MS used as a client
Choose the connection in which MS used as a server
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
140 / 186