2.16. ATX Set CONNECT Result Code Format and Monitor Call Progress
ATX Set CONNECT Result Code Format and Monitor Call Progress
Execution Command
ATX<value>
Reference
V.25ter
Parameter
<value>
0
1
2
3
4
2.17. ATZ Set all Current Parameters to User Defined Profile
ATZ Set all Current Parameters to User Defined Profile
Execution Command
ATZ[<value>]
Reference
V.25ter
Parameter
<value>
0
M35_AT_Commands_Manual
Response
This parameter setting determines whether or not the TA
detected the presence of dial tone and busy signal and
whether or not TA transmits particular result codes.
OK
CONNECT result code only returned, dial tone and
busy detection are both disabled
CONNECT<text> result code only returned, dial tone and
busy detection are both disabled
CONNECT<text> result code returned, dial tone detection
is enabled, busy detection is disabled
CONNECT<text> result code returned, dial tone detection
is disabled, busy detection is enabled
CONNECT<text> result code returned, dial tone and
busy detection are both enabled
Response
TA sets all current parameters to the user defined profile.
OK
Reset to profile number 0
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
25 / 186