At+Cgqreq Quality Of Service Profile (Requested) - Quectel M35 Command Manual

is null or omitted, then a value may be provided by the TE during the PDP startup
procedure or, failing that, a dynamic address will be requested. The allocated address may
be read using the +CGPADDR command
<d_comp> A numeric parameter that controls PDP data compression
0
Other values are reserved
<h_comp> A numeric parameter that controls PDP header compression
0
Other values are reserved
Example
AT+CGDCONT=1,"IP","CMNET"
OK

10.3. AT+CGQREQ Quality of Service Profile (Requested)

AT+CGQREQ Quality of Service Profile (Requested)
Test Command
AT+CGQREQ=?
Read Command
AT+CGQREQ?
Write Command
AT+CGQREQ=<cid>[,<precedence>[,
<delay>[,<reliability>[,<peak>[,<mean
>]]]]]
Reference
GSM 07.07
M35_AT_Commands_Manual
off (default if value is omitted)
off (default if value is omitted)
Response
+CGQREQ: <PDP_type>,(list of supported <precedence>s),
(list of supported <delay>s),(list of supported <reliability>s),
(list of supported <peak>s),(list of supported <mean>s)
OK
Response
+CGQREQ:
<cid>,<precedence>,<delay>,>reliability>,<peak>,<mean
>
<CR><LF>+CGQREQ:
<cid>,<precedence>,<delay>,<reliability>,<peak >,<mean
>
...
OK
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
// Define PDP context, <cid>=1,
<PDP_type>=IP,<APN>=CMNET
Confidential / Released
GSM/GPRS Module
M35 AT Commands Manual
113 / 186