Set Policies - PerkinElmer LabChip GX User Manual

Set Policies

Use the Set Policies tab to specify password, login, automatic lock,
and signature policies for the LabChip GX software.
The Set Policies tab contains:
Access Right
Password Expires After
Number of Retired
Passwords to Remember
Minimum Password Length Specifies the minimum length of each password.
Maximum Login Attempts
Minutes to Automatic Lock
Require Signature on File
Update
V4.2
Figure 128. User Administration Window - Set Policies
Function
Specifies the number of days until each password
expires. Range is 1 to 1000 days.
User cannot reuse the specified number of old
passwords.
Specifies the number of times the user can attempt to
log in before being locked out of the software. Range is
from 3 to 20. This option can be disabled to allow
unlimited retries without locking the user out.
Specifies the number of minutes that the software is
inactive until the LabChip GX software locks
automatically. Range is from 5 to 4320 minutes (3
days). To disable this option, clear the check box.
If selected, an electronic signature is required to save
modified data files. Signatures can be performed by
any user with the Perform Signature option selected in
the Set Policies
LabChip GX User Manual
Software Reference 269
tab.
PerkinElmer