Rear Connectors
The rear connectors are used to connect the LabChip GX
instrument to the computer and power supply.
The following connectors are located on the back of the instrument:
AC Power
Plug the power cord into this connector and a power outlet.
Cable
WARNING
Appliance inlet is disconnecting device. Place device or equipment in
a manner so that disconnecting device is accessible at all times.
USB Cable
Connects the LabChip GX instrument to the computer.
V4.2
Figure 131. Rear Connectors
LabChip GX User Manual
LabChip GX Instrument Description 272
PerkinElmer