Viewing Graphs In The Electropherograms Tab - PerkinElmer LabChip GX User Manual

To add samples to the Overlay Electropherograms Tab, Ctrl +
click on the sample that you want to add in the
List,
are identified by: dashed outlines around the selected gel lanes in
the Gel view, light blue wells in the Plate view, and dark gray rows in
the Well Table view and Peak Table view.
To remove a specific sample from the graph, Ctrl + click on the
sample that you want to remove in the
View,
To display only one sample in the Overlay Electropherograms tab,
click on one sample in the
Table
To view the point coordinates and size of the position of the
cursor, hold down the CTRL or Shift key and move the cursor over
the graph.
To view the point coordinates and slope of a point on the trace,
hold down the ALT key and the CTRL key and move the cursor over
the trace.

Viewing Graphs in the Electropherograms Tab

If the
Layout on the
you want to display the Electropherograms tab, and click the Apply
button. The Electropherograms tab opens.
V4.2
Gel View, Well Table
Well Table View, or
View, or Peak Table
Electropherograms Tab
LabChip GX Main
Figure 37. Electropherograms Tab with Multiple Graphs
LabChip GX User Manual
View, or Peak Table
Plate View or Plate
Peak Table View.
Plate View or Plate
View.
is not open, select Collection 
Window, select the location where
Data Analysis 90
Plate View or Plate
View. Selected wells
List, Gel
List, Gel View, Well
PerkinElmer