Front Panel - PerkinElmer LabChip GX User Manual

Front Panel

The controls on the front panel open the front door, eject the chip
cartridge, and indicate the status of the instrument.
The front panel contains the following parts:
Status Indicates the state of the instrument:
Light Dark (not lit) - Power is off.
Solid green - Power is on and instrument is idle.
Flashing green - Running a plate.
Red - Power is on, cannot communicate with software.
Flashing Red - Error detected.
Chip Moves the robot to open the door and releases the chip cartridge to
button access the chip. This button is illuminated when this function is
available and flashes when movement is in progress.
Eject Moves the robot and opens the door to access the plate in the
button microplate carrier. This button is illuminated when this function is
available and flashes when movement is in progress.
Power Turns the LabChip GX instrument On (Run) or Off (Standby). Note that
Button power is still supplied to the power supply fans when the power switch
is in the Standby position. Turning the instrument on reloads the system
firmware and homes the robot.
V4.2
Figure 130. Front Panel
LabChip GX User Manual
LabChip GX Instrument Description 271
PerkinElmer