Using The Gx Software To Analyze Gx Touch Data - PerkinElmer LabChip GX User Manual

Using the GX Software to Analyze
GX Touch Data
After a GX Touch run is complete, you can use the LabChip GX
software or the LabChip GX software in Reviewer mode to view and
analyze the plate data. The LabChip GX software can open multiple
data files in the same workspace to compare the data from different
plates. Analysis settings can be changed for single wells, entire
plates, or all plates in the workspace.
1
2
3
4
5
V4.2

Using the GX Software to Analyze GX Touch Data 107

Open the LabChip GX software in Reviewer mode .
Open a new workspace (see
Open the GXT data file (see
be in a network location or on the GX Touch computer. To select
multiple data files, CTRL + click the data file names.
Select wells in the plate diagram to add wells to the collection
(see page 62).
Change the analysis settings as desired. See
Analysis Parameters" on page 72
LabChip GX User Manual
page 59).
page 60). The data file (*.gxd) may
"Modifying
for details.
PerkinElmer