Selecting the Wells in a Collection
Each collection can display different wells or the same wells in
different orders. To select the wells to display in a collection:
1
2
3
V4.2
Select the collection where the wells will be displayed.
In the plate diagram in the Plate View, select the wells to
display:
Figure 23. Selecting Wells
•
Select individual wells: click on the well.
•
Select a block of wells: click on the well in one corner and
drag to the opposite corner well.
•
Select an entire row: click the row letter at the left.
•
Select an entire row and the corresponding ladder: click
the row letter at the right (if the plate sip order is row-wise).
•
Select an entire column: click the column number at the
top.
•
Select an entire column and any corresponding ladder:
click the column number at the bottom (if the plate sip order
is column-wise).
•
Select all the wells by rows: click the button in the top left
corner of the microplate.
•
Select all the wells by columns: click the button in the top
right corner of the microplate.
•
Select all ladder wells and microplate wells: click the
button at the bottom right corner of the microplate.
•
Select individual ladders: click on the ladder.
Clear individual ladders: right-click on the ladder and
•
select Remove Ladder.
•
Select all ladder wells: click the "L" icon at the bottom left
corner of the microplate.
•
Clear individual wells: right-click on the well and select
Remove Well.
Save the workspace to save the wells selected in the collection.
LabChip GX User Manual
Data Analysis
62
PerkinElmer