Restoring Data Files From The Remote Cdr - PerkinElmer LabChip GX User Manual

Restoring Data Files from the Remote CDR

The last backed up copies of data files can be restored from the
backup database on the remote CDR Server if the LabChip GX
computer is replaced.
To restore the data files from the backup database:
1
2
3
4
NOTE
Server name, folder name, username, and password are case
sensitive.
5
6
7
8
9
10 Click the Close button to close the CDR Utility Window.
V4.2
Verify that the Remote CDR Server is accessible on the
network.
Log into the LabChip GX software using the default
administrator user name and password.
Select Tools  CDR Utility. The
Select the Enable Remote CDR Backup check box.
Type the computer name of the Remote CDR server in the
Remote Computer Name/IP Address text box. If the remote
computer and the local computer are not in the same Windows
workgroup, type the IP address of the remote computer.
In the Folder text box, type the name of the folder in the remote
CDR server that you want to restore the LabChip GX data from.
(Make sure to select the same folder to which the data was
backed up.)
Type the folder username in the User Name text box. This
username is the same username that was used to create the
CDR Server folder.
Type the folder password in the Password text box. This is the
same password that was used to create the CDR Server folder.
Click the Apply button. The progress bar display the status of
the restoration process and a confirmation displays when the
restore is complete.
LabChip GX User Manual
Software Security 136
CDR Utility Window
PerkinElmer
opens.