Peak Table Properties - PerkinElmer LabChip GX User Manual

Peak Table Properties

To view the Peak Table Properties, click the Properties tab on the
right side of the
This window contains the following options:
Option Function
Sort within If selected (default), sorting occurs only within each well rather
each well than across the entire table. Click a column header to sort the
table rows by the column value. If cleared, uses conventional
sorting, which mixes together peaks from all wells. Clicking the
column header sorts in ascending/descending/original order.
Hide excluded If selected, excluded peaks and unknown peaks are hidden in the
peaks Peak Table view. In protein assays, the analysis excludes system
peaks, which are compounds that are artifacts of the assay
chemistry and not generally of interest.
Expected If selected, only peaks identified as Expected Peaks display in the
Peaks only Peak Table.
Filtered peaks If selected, the Peak Table displays only peaks that match the filter
only criteria. Useful when generating a collection based on a filter
whose selection criteria are peak specific, such as Area,
Concentration, %Purity, Expected Peaks, and Size.
Selected in Gel If selected, only the gel lanes selected in the
select multiple wells, Ctrl + click on the lanes in the Gel view.
Entire If selected, all wells in all plates that are included in the collection
Collection are displayed.
Pin icon In the top right corner, used to lock in place or unlock the
Properties tab. If locked in place, the Peak Table display panel is
resized to accommodate the tab.
V4.2
Peak Table View.
Figure 68. Peak Table Properties
LabChip GX User Manual
Software Reference 179
Gel View display. To
PerkinElmer