Using The Default Ladder For Alignment; Exporting The Default Ladder In An Assay; Clearing The Default Ladder In A Plate - PerkinElmer LabChip GX User Manual

Using the Default Ladder for Alignment

For DNA, gDNA, and RNA assays, after the default ladder is
selected for a data file, the default ladder must be assigned to the
desired wells in the plate.
1
2
3
4

Exporting the Default Ladder in an Assay

The default ladder in a data file is included in the analysis settings
for a new assay when the settings are exported as an assay.
Exporting the assay enables you to use the default ladder in future
runs.
1
2
3
4

Clearing the Default Ladder in a Plate

To delete the default ladder for a plate and return the alignment to
the ladder settings for the assay type:
1
2
V4.2
With the plate data file open, select Analysis  Analysis
Settings to open the
Alignment Tab.
Select the Align Well Groups to Specified Ladder option.
For each group of wells under Align Well Group, select Default
Ladder in the To Ladder column.
Click the Apply button to apply the changes to the active data
file or click the Apply Global button to apply the changes to all
data files in the current collection.
After clicking the Apply or Apply Global button in the
Analysis Window, the Export as Assay button displays.
Click the Export as Assay button. The Export Assay Settings
from Plate to Assay File window opens.
Select the desired location for the assay file, type the desired
name for the assay file, and click the Save button.
Select the new assay in the
The new data file will include the default ladder.
With the plate data file open, select Analysis  Analysis
Settings to open the
Analysis Tab.
Click the Clear Default Ladder button at the bottom of the
Default Ladder table.
LabChip GX User Manual
Assay Analysis Window, and then click the
Run Tab on the
Assay Analysis Window, and then click the
Data Analysis 79
Assay
Start Run Window.
PerkinElmer