Add Plate Window - PerkinElmer LabChip GX User Manual

Add Plate Window

Use the Add Plate window to add new plates to the system. To open
the Add Plate window, click the Add Plate button on the
Information
The Add Plate window contains the following settings:
Plate Name Specifies the plate name that displays in the
Plate Type Specifies the number of wells in the plate, either 96 or 384.
X Margin The distance from the outer edge of the plate to the center of well A1
in the X direction.
Y Margin The distance from the outer edge of the plate to the center of well A1
in the Y direction.
Plate Height The distance from the bottom of the plate to the top of the plate.
Well Depth The distance from the top of the plate to the bottom of the well.
Sip Height The distance from the bottom of the well to the bottom of the sipper
when the sipper is positioned to sip sample from the well.
V4.2
Window.
Figure 72. Add Plate Window
LabChip GX User Manual
Software Reference 185
Plate
Start Run Window.
PerkinElmer