Fuses; Mechanical Safety - PerkinElmer LabChip GX User Manual

International
All power cord sets must be approved by an acceptable, accredited
agency responsible for evaluation in the country where the power
cord set and system will be used.
The flexible cord must be <HAR> Type H05VV-F, 3-conductor,
minimum 0.75 - 1 mm
set fittings that is, the appliance coupler and wall plug, must bear
the certification mark of the agency responsible for evaluation in the
country where it will be used. The appliance coupler must meet the
mechanical configuration of an EN 60 320/IEC 320 Standard Sheet
C13 connector for mating with appliance inlet on the system.

Fuses

The LabChip GX instruments do not contain any user replaceable
fuses. Contact PerkinElmer Technical Support (see
page

Mechanical Safety

The LabChip GX instruments have a three axis robot that moves
quickly and can be a pinch hazard. Keep the front door of the
instrument closed when the robot is moving. Keep hands away from
the robot when not actually placing microplates in the instrument or
changing the ladder and buffer vials. Robot access areas are
marked with the following warning label:
V4.2
2
conductor size (230 volt input). Power cord
3) if blown fuses are suspected.
LabChip GX User Manual
Instrument Safety 11
"Contact Us" on
PerkinElmer