Verify All Target Positions Correct Window - PerkinElmer LabChip GX User Manual

Verify All Target Positions Correct Window

Use the Verify All Target Positions Correct Window to verify the
plate, buffer vial, and ladder vial were all punctured correctly.
The Verify All Target Positions Correct Window contains the
following options and buttons:
Option/Button
Positions Correct
check box
Back button
Next button
Finish button
Cancel button
V4.2
Figure 109. Verify All Target Positions Correct Window
Function
Select the check box if all positions were punctured in the
center. Clear the check box if any of the positions need to be
corrected.
Displays the Verify All Target Positions
If the Positions Correct check box is selected, the Next button
changes to a Finish button.
If the Positions Correct check box is not selected, displays the
Verification Failed Window. Click the Next button to display
the Teach Robot Window
Closes the Robot Teach Wizard.
Closes the Robot Teach Wizard without saving changes to any
positions.
LabChip GX User Manual
Software Reference 242
Window.
to adjust the taught positions.
PerkinElmer