Chip Status And Run Status - PerkinElmer LabChip GX User Manual

Chip Status and Run Status

The Chip Status and Run Status areas on the
Window
in the instrument, and information about the assay that is currently
running.
NOTE
The Chip status and Run status area does not display if the
LabChip GX software is in Reviewer mode.
System Status - Displays the status of the system. Displays Ready
when the system is ready to run an assay. While an assay is
running, each stage of the assay displays: Priming, Warming,
Running, etc.
Run Button - Opens the
assay. See the Assay User Guide for chip preparation instructions.
While an assay is running, the Run button changes to a Stop button
as shown above. Click the Stop button to stop a running assay.
Assays that have been stopped cannot automatically be continued.
See
restarting a stopped assay.
Wash Button - Begins a sequence of steps to wash the chip. See
the Assay User Guide for chip preparation instructions.
V4.2
display the status of the system, information about the Chip
"Continuing a Stopped Run" on page 32
LabChip GX User Manual
Software Reference 151
Start Run Window to begin to run an
for details on
LabChip GX Main
PerkinElmer