Plate Information Window - PerkinElmer LabChip GX User Manual

Plate Information Window

Use the Plate Information window to view, add, or change plate
names and measurements. To open the Plate Information window,
select Tools  Plate Editor on the
The Plate Information window contains the following tabs:
•
•
The Plate Information window contains the following options and
buttons:
Plate Information
table
Delete Selected
Plate
Add Plate
Modify Selected
Plate
Verify Plate
Close button
V4.2
Figure 98. Plate Information Window
Predefined Plates - Displays Caliper-defined plates. These
plates are read-only and cannot be edited or deleted.
Custom Plates - Displays all user-created plates. Plates can be
added, deleted, and modified.
Displays the plate information for each plate defined for use in
the system. (See "Add Plate Window" on page 185
description of each column.)
Deletes the selected plate from the system. (Only available
when the Custom Plates tab is selected.)
Opens the Add Plate Window
new plate. (Only available when the Custom Plates tab is
selected.)
Opens the Add Plate Window
selected plate. (Only available when the Custom Plates tab is
selected.)
Opens the Verify Plate window to perform a puncture test
using the selected plate information. Follow the instructions in
the Verify Plate window to test the settings for the selected
plate.
Closes the Plate Information window.
LabChip GX User Manual
Software Reference 229
LabChip GX Main Window.
to enter the information for a
to edit the information for the
for a
PerkinElmer