Error Message Area - PerkinElmer LabChip GX User Manual

Error Message Area

Error messages are displayed below the
Status
Error messages can result from hardware or software problems.
Most are the result of peaks not being located by the analysis
algorithms of the software. This can be due to a sample or ladder
peak not appearing as expected. The software settings (in the
Find
errors. Additionally, manually excluding a peak (see
analysis (in the
for a run can cause errors with the peak find algorithm.
See
preventing or resolving errors.
V4.2
on the LabChip GX Main
Tab) can also cause peaks to be undetected, which can cause
Peak Table
"Error Messages" on page 285
LabChip GX User Manual
Software Reference 153
Chip Status and Run
Window.
View) or changing the start or end times
for a list of errors and tips on
Peak
page 74) from
PerkinElmer