Table of Contents
Advertisement
Generic Commissioning instructions
How to set up the Engineer password
The engineer password (PIN) gives access to level 3 menu
options which are used during the commissioning and
maintenance of the fire alarm system. To set up the password for
the first time:
¨
Press the Menu On/ Off button and select [Test/Eng]
-> then momentarily press <etc> to select [Config] ->
[New Pass] and then type a password (PIN) and press
the Enter key.
¨
It is recommended that the PIN is at least 4 numbers
and no greater than 15 numbers for Vigilon
and Vigilon Compact VA panels. The Vigilon panels
can use numbers and letters.
How to set up a Customer password
"
An Engineer PIN must be set up before you
can create a Customer PIN.
The customer authorised operators can be given a password
(PIN) to access level 2b controls, which provides access to
restricted menu options that cannot alter the configuration of the
system. To set up the customer password for the first time:
¨
Press the Menu On/Off button and then [Test/Eng] ->
[UserCode] ->type '2' and select [Enter] , select [New
Pass] and then type a password of less than 15
characters in length and press the Enter key.
¨
It is recommended that the PIN is at least 4 numbers
and no greater than 15 numbers for Vigilon
and Vigilon Compact VA panels. The Vigilon panels
can use numbers and letters.
40
compact
compact
4188-856_i2_12/06_Generic Vigilon (Compact + VA) Comms.
Advertisement
Table of Contents
