Table of Contents
Advertisement
Data and Installation instructions
Main Control Cards
(BS - version 3 / 3+ panels or nodes)
This leaflet covers a range of Main Control(ler)
Card (MCC) options for BS version 3/3+ control
panels and terminal nodes. Each MCC is supplied
with a number of chips having part numbers
2211-xxx, see chart overleaf. The appropriate chip
must be fitted to the card before card installation.
Card options:
¨
VIG-MCC-BS-NOD-UPG, 34K-MCC-UPGR,
VIG-MCC-V3+, VIG-MCC-3400 and
VIG-MCC-3500-NODE.
P4 to accept a
40-way ribbon
cable from the DKC
Reset
Switch
SW1
Part number
2211-xxx
BATT1
MCC card socket fits
into the Backplane slot for (LCC)
Lithium battery + side up
Remove sleeve before
installing the card
Chip 2211-xxx
¨
Fit the correct chip 2211-xxx in the MCC for the
type of panel or node, see chart overleaf.
P1
To DKC
P4
LCC - P1
IOC- P2
LOOP 1 - P3
LOOP 2 - P4
LOOP 3 - P5
LOOP 4 - P6
P7
P8
Vigilon and 34K Control panel and
Network node backplane
LOOP PROCESSOR CARDS
RAM NC
3408 Control panel backplane
4188-860 issue 1_01/06_MCC BS
P2 for future use
USB port for
future use
40 way ribbon
MAIN CONTROL CARD
20 WAY
cable
(Slot or Card 0)
RIBBON
CABLE
20 way ribbon
cable
40 WAY
Main Control card
RIBBON
CABLE
Input/Output card
Loop Processor card
Space for 3 Loop
Processors
RAM Card (only fitted
in 16 line display panel)
Network card
3300 Mk2, 32K and Senator 2
Control panel backplane
MAIN CONTROL
LOOP PROCESSOR CARDS
CARD
NC
RAM
IOC
3404 & 3300 Mk1 Control panel backplane
Battery connection
The MCC has a battery sleeve that must be
removed before the MCC card is installed into the
backplane.
&
Once the battery sleeve is removed from
the MCC, the card MUST NOT be placed on a metal
surface as this may result in damage to the
components on the card.
Technical data
Overall size
Weight
Lithium Battery
Operating
temperature
Storage temperature -10°C to 55°C
Relative humidity
(non condensing)
Backplane
The MCC card must be installed in the correct
location on the appropriate backplane.
INPUT OUTPUT CARD
(Slot or Card 15)
RAM (Memory) CARD
(Slot or Card 3)
LOOP PROCESSOR CARD
loop 1
(Slot or Card 1)
LOOP PROCESSOR
CARD Loop 2 optional
(Slot or Card 2)
AC
E
32K and Senator 2 Network Interface
backplane
3300
3404
IOC
MAIN CONTROL
CARD
HALT
-
+
AC
AC
E
3505 Terminal node backplane
NORMAL
by Honeywell
157mm height x 100mm
width
96g (approximate)
CR2032 3V cell.
Replace the battery only
with the same or equivalent
type. Dispose of all used
batteries according to the
manufacturer's instructions.
0°C to 45°C
up to 90%
IO switch
enable
IO CARD
dongle
Dongle
(Slot or
Card 15)
MAIN
NETWORK
CONTROL
CARD
CARD
(Slot or Card 13)
(Slot or Card 0)
SPARE
SLOT
-
+
AC
P4
P5
P6
P7
Loop (3300)
IO
NETWORK
SPARE
SLOT
CARD
Card
(Not used
for 3300)
MAIN
CONTROL
CARD
P4
P5
P6
P7
1
Advertisement
Table of Contents
