Table of Contents
Advertisement
Sectors
*
I/O LINES MAY BE SECTORED INDIVIDUALLY
ONLY FOR STANDARD MAINS POWERED INTERFACE UNITS
AND NOT FOR LOOP POWERED INTERFACE UNITS
DEVICES
ASSIGN
& I/O LINES
WITHIN A
*
SECTOR
DELAY
ACTION
BLOCK
COMMAND
ACTION
BUILD
SECTOR
ACTION
That has just
come into fire
¨
There can be up to 32 sectors per loop
¨
a sector is a collection of devices on the same loop having a common action.
¨
a sector that is actioned ON will activate its alarm devices, such as interface outputs, S cubed and alarm sounders.
¨
a sector can be configured to give one of three signals
•
Signal 1 Alert (priority 3)
•
Signal 2 Evacuate (priority 2)
•
Signal 3 Continuous (priority 1)
¨
sectors 1-28 operate automatically with 'Sound Alarms' and 'Silence Alarms' buttons
¨
a sector (any one of 1-28) that is configured for NO action on 'Sound Alarms' button will be silenced on operation
of the 'Reset' button
¨
the sectors 29-32 are independent of the 'Sound Alarms' button and are primarily used with Fixed Extinguishant
interface product which is not no longer supported. However the sectors 29-30 can be configured to normal sector
operation.
¨
sensors, call points and interface inputs may be assigned to more than one sector.
¨
a loop powered interface is assigned to a sector and consequently the inputs and outputs lines of
be assigned to the same sector.
¨
alarm sounders, OHS and interface outputs are restricted to one sector only.
¨
There can be up to 10 Voice Alarm Zones.
¨
Voice alarm zone are push button switches on the control panel that can be assigned to Sectors.
¨
Any normal Sector (1-28) can be assigned to any voice alarm zone (1-10)
4188-856_i2_12/06_Generic Vigilon (Compact + VA) Comms.
SIGNAL
1
SIGNAL
2
SIGNAL
3
SIGNAL
1
ALL
SIGNALS
OFF
SIGNAL
2
SIGNAL
3
SIGNAL
1
ALL
SIGNALS
SIGNAL
OFF
2
SIGNAL
3
ALL
SIGNALS
OFF
DEFAULT: SIGNAL-1 = ALERT
SIGNAL-2 = EVACUATE
SIGNAL-3 = CONTINUAL
Vigilon (EN & BS) Compact (VA) panels
SECTOR FUNCTIONS
32 SECTORS
PER LOOP
TRIGGER
NOTE : SECTORS 29 TO
32 ARE FOR
ACTION
SPECIAL USE
ACTION
SECTOR
ACTION
SETUP THE SECTOR
TO DE-ENERGIZE ON
ASSIGN
SILENCE ALARMS
OR RESET
BUTTON
ASSIGN
NOTE : A SECTOR CAN ONLY ACTION OTHER LINKS
IF THE FIRE IS AT A DEVICE ASSIGNED TO THAT SECTOR.
NOTE: Voice alarm zones are push button
controls on the main panel.
COMMAND
BUILD
DELAY
BLOCK
AUX
RELAYS
SECTOR
VOICE ALARM
ZONES
MASTER
SECTOR
that interface will
117
Advertisement
Table of Contents
