Table of Contents
Advertisement
Generic Commissioning instructions
Sounders Configuration
¨
The standard alarm sounders of each standalone system can be configured for three sound output signals.
¨
every 250mS over a 2 second time the sound output can be altered to high, low or off tone.
¨
sound signal configuration can be altered by modifying the FAB-SAB pairs by pressing the button Menu On/Off
to select [Set-Up] -> <etc-> -> [Modify]-> <etc> -> [Signal n] -> [Sounder] -> [Enter] and enter the FAB/SAB
for signal n and press enter.
FABs & SABs
The FAB (first action byte) determines tone and On/Off control while the SAB (second action byte) determines the action to be
performed on the output.
Number
FAB action
0
no output
1
-
2
frequency tone
3
-
4
On/Off control.(On
being low frequency)
5
-
6
high frequency tone
7
-
8
-
9
-
A
-
B
-
C
-
D
-
E
F
Factory Default FABs SABs
Signal 3 (Continuous)
Output turns on Low frequency sound continuous
every 0.5 seconds.
Signal 2 (Evacuate)
First output turns on Low frequency sound
continuously, then every half second the High
frequency output is pulsed for 250mS.
Signal 1 (Alert)
Pulses high frequency for 250mS every half second.
124
SAB action
Turns Off selected Outputs
10mS pulse on Selected Outputs
40mS pulse on Selected Outputs
90mS pulse on Selected Outputs
160mS pulse on Selected Outputs
250mS pulse on Selected Outputs
350mS pulse on Selected Outputs
480mS pulse on Selected Outputs
630mS pulse on Selected Outputs
800mS pulse on Selected Outputs
980mS pulse on Selected Outputs
1.2S pulse on Selected Outputs
1.4S pulse on Selected Outputs
1.6S pulse on Selected Outputs
1.9S pulse on Selected Outputs
Turn on Selected Outputs
Time in seconds
0
0.25
4F
00
4F
25
65
00
4188-856_i2_12/06_Generic Vigilon (Compact + VA) Comms.
0.5
0.75
1.0
1.25
4F
00
4F
00
4F
25
4F
25
65
00
65
00
1.5
1.75
4F
00
4F
25
65
00
Advertisement
Table of Contents
