10: Password Change - Honeywell FIre-LITe ALArms MS-9600LS Manual

Master Programming Level
3.6.10 Password Change
PROGRAMMING
The factory set passwords, which have been programmed into the control panel, can be changed by
1=PASSWORD CHANGE
selecting the Password Change option. Pressing 1 while viewing Programming Screen #4 will
2=CLEAR PROGRAM
3=PROGRAM CHECK
cause the following screen to be displayed:
Programming Screen #4
Press 1 to change the Master Programming Level password, 2 to change the Maintenance Level
password, or 3 to change the Remote Download password. Note that the passwords will not be dis-
played on LCD annunciators.
The following screen will appear when either change option is selected:
A flashing cursor will appear in the center of the display. Enter a new five digit password (such as
10101 for the Master Level). After the fifth digit is entered, the following screen will be displayed:
Re-enter the new password to accept the change. The display will return to the initial Password
Change Screen.
MS-9600LS Series Manual — P/N 52646:B2 2/12/2010
PASSWORD CHANGE
1=MASTER
2=MAINTENANCE
3=REMOTE DOWNLOAD
Password Change Screen
ENTER NEW FIVE DIGIT
PASSWORD
Enter Password Screen
VERIFY NEW
PASSWORD
Password Change Screen
Programming
135