Inspecting The Pressure Relief Valve - ABB IRB 2600 Series Product Manual

3 Maintenance

3.3.11 Inspecting the pressure relief valve

3.3.11 Inspecting the pressure relief valve
Location of the pressure relief valve
The figure shows the location of the pressure relief valve.
xx0900000131
A
Required equipment
Equipment
Standard toolkit
Inspecting pressure relief valve
Use this procedure to inspect the pressure relief valve.
1
2
Continues on next page
144
Pressure relief valve
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot work-
ing area.
DANGER
It is important to keep the pressure relief
valve open and clean. If the air pressure is
stopped up, too much pressure can be built
up which can be hazardous.
© Copyright 2009-2018 ABB. All rights reserved.
A
Note
Content is defined in section
on page 441.
Note
Product manual - IRB 2600
3HAC035504-001 Revision: Q
Standard tools