MA lighting dot2 User Manual page 94

dot2 User Manual - How to...
Version 1.5 – 2018-11-29
English
If the Default Only setting is chosen then the command is F0 7F 7F 02 7F 03 F7 to continue the fade.
04 (Timed_Go):
This is the same as the 01 (Go) command but with a specified time. Please read (and understand) about the 01
(GO) command and data above. Just to make this a bit simpler we are going to pretend that the "Default Only"
option is turned on in the MSC options in Setup.
To transmit a timed Goto the time needs to be specified first and then the cue number. The time is specified by
five hex octets. They represent (in order) Hour, Minute, Second, Frame, and Fraction.
The hour, minute, and second sections are very strait forward. The number needs to be transmitted in hex
numbers. It is possible to transmit a value above the normal limit for example 64 seconds (hex = 40). The station
will transmit this as 1 minute and 4 seconds.
Right now the console will not accept any time specified in the Frame and Fraction sections. But it transmit
values below a second in the Frame section. The console divides the second into 24 frames. So 0.5 seconds is 12
Frames and the received hex number would be 0C.
Example: Goto cue 75 with the fade time of 20 seconds (All Devices, All Format, and Default Only setting):
F0 7F Device ID 02 Command Format Command Data
F0 7F 7F
Example: Goto cue 5.4 with the fade time of 1 minute on executor 3 on page 1 (All Devices, All Format, and
Exec.Page setting):
F0 7F Device ID 02 Command Format Command Data
F0 7F 7F
06 (Set):
The set command is used to move a fader to specific position. The 06 command is followed by two hex octets
that indicates the fader and then two more octets that dictates the position.
The first of the two numbers for the fader is the fader number (on a page). The fader number 1 is hex number 00,
the second is 01 and so on. Remember that this is a hex number so fader 16 have hex number 0F and decimal
17 is hex 10.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
02 7F 04
02 7F
00 00 14 00 00 37 35 2E 30 30 30
00 01 00 00 00 35 2E 34 30 30 00 33 2E
04
31
F7
F7
F7
F7
94 of 614