MA lighting dot2 User Manual page 529

dot2 User Manual - Commands
Version 1.5 – 2018-11-29
English
There are two ways to do this:
a) Press and hold
b) Press and hold
Example 2
Let´s assume you will park all attributes of fixture 1 at 100 %.
Press and hold
All attributes of fixture 1 are parked at 100 %.
Example 3
Let´s assume you will park all dimmer values of the current fixture selection.
There are two ways to do this:
a) Press and hold
b) Press and hold
Dimmer. Tap Enter .
All dimmer values of the current fixture selection are parked.
Example 4
Let´s assume you will park DMX channel 1.2.
There are two ways to do this:
a) Press and hold
b) Press and hold
DMX channel 1.2 is parked.
Related Links
DMX View
Fixtures View
Preset Type Bar
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
+ Pause (=Park) and tap at fixture 1 in the
+ Pause (=Park) Fixture 1 Please
+ Pause (=Park) Fixture 1 At 1 0 0 Please
+ Pause (=Park) and tap at Dimmer in the
+ Pause (=Park)
+ Pause (=Park) and tap at DMX channel 1.2 in the
+ Pause (=Park) DMX 1 . 2 Please
fixtures
.
preset type
+ Preset (=PresetType) and enter in the command line the word
.
view.
.
bar.
DMX view.
529 of 614