MA lighting dot2 User Manual page 470

dot2 User Manual - Commands
Version 1.5 – 2018-11-29
English
Example 2
Let´s assume, you will set the attributes of the preset type position back to their default values, for the current
selected fixture.
There are three ways to do this:
a) Press + .
b) Press + .
c) Press + .
virtual keyboard.
The attributes of the preset type position are set to the default values, for all selected fixture.
The values are active in the programmer.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
(=Default) and tap Position in the
(=Default) + Preset
(=Default) + Preset
preset type bar.
(=PresetType) 2 Please
(=PresetType) and type in the command line Position with the
.
470 of 614