MA lighting dot2 User Manual page 76

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - How to...

Version 1.5 – 2018-11-29

Figure 4: Edit Cue Number window.

At the top of this window you can set the range of cue you want to renumber. Then you set the new beginning

number and the step width for the cues. When you are happy with your settings, then you tap the Renumber

You can't use renumber to move a cue - and the cue list always have to be in numeric order. So you can only

renumber the cue(s) inside the boundaries of any cues before and or after the set range.

Deleting a Cue

You can delete a cue by using the

the cue the "Normal" way or using "Cue Only". You are only asked if you delete a cue that isn't the last cue.

"Normal" will result in values tracking from the previous cue into the next. Values that might been changed in the

cue you are deleting. "Cue Only" will leave the following cues looking the way they did before you delete the cue.

Table of Contents