MA lighting dot2 User Manual page 251

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - Views & Windows

Version 1.5 – 2018-11-29

The control sliders works absolute. A tap on a control slider sets a new control value and does not

follow the already set control values.

The respective encoders works relative to the already set control values.

In the raw control view, you control the raw control channel values in natural values (0-100) of the selected

Encoder Bar Functions

The encoder bar is only visible in the raw control views.

It displays the respective raw channel depending on the selected slider.

To select the value, turn the encoder left or right.

To change the encoder speed to slow, press the encoder key

To change the encoder speed to ultra slow, press and hold the

To open the calculator, press the encoder.

Table of Contents