MA lighting dot2 User Manual page 514

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - Commands

Version 1.5 – 2018-11-29

Let´s assume, you will send a MIDI note on a specific cue to trigger a sound station.

Requirements:

Connected sound station device e.g. computer on the MIDI Out connector.

Stored cue on an executor.

Figure 1: Cues View with MIDI Notes in the CMD column

The MIDI note will be send if the cue is executed and will trigger the connected sound station.

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

and type in the CMD (= command) column the following syntax: MidiNote 12

Show Quick Links

Table of Contents