Top Command - MA lighting dot2 User Manual

dot2 User Manual - Commands
Version 1.5 – 2018-11-29
English

7.67. Top Command

This page describes the syntax and how to use the top command.
To go to the top command, press and hold
Description
With the top command you can jump to the top of a cue list from an executor
directly
with fade time
The first cue of the cue list will be executed.
The top command is basically a
Syntax
1. Jump directly to the top of a cue list from an executor.
Top Executor 1
2. Jump with fade time to the top of a cue list from an executor.
Top Executor 1 Fade 3
Example 1
Let´s assume you will jump directly to the top of a cue list from the executor 1.
To get a dimmer output, make sure that the fader of an exutor is not at 0 %.
If the fader is at 0 % you get no dimmer output.
There are three ways to do this:
a) Press + Flash
b) Press + Flash
c) Press + Flash
The first cue of the cue list will be executed.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
and
Goto command.
(=Top) and the respective executor button
(=Top) Exec 1 Please
(=Top) and tap on the respective executor in the
Flash on the console.
.
.
executor bar view.
566 of 614