MA lighting dot2 User Manual page 267

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
Off Effects
Every effect view has the Off function.
Tap off, to discard a running effect from the fixture selection in the programmer.
If you tap Off in the dimmer effects view, all dimmer effects will be discarded in the programmer.
Example:
Let´s assume, you have a running dimmer effect in the programmer and additional pan tilt values.
Figure 3: Running dimmer effect
To discard only the effect values from the selected fixtures, open the dimmer effect view and tap Off .
Figure 4: Dimmer effect is off
The dimmer effect is discarded from the programmer.
Stomp Effects
Every effect view has the Stomp function.
Tap stomp, to mute a running effect stored on an executor.
To deactivate Stomp, press
Example:
Let´s assume, you have stored cue 1 with a dimmer effect and you will mute this effect in cue 2.
1. Select the fixtures in the fixture view that should mute the effect from cue 1.
2. Open the dimmer effects view and tap Stomp .
3. Press Store Cue 2 Please
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Clear .
.
267 of 614