MA lighting dot2 User Manual page 253

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
To start a timecode record for the executor, tap at TC Record (= timecode) in the title bar. The record icon
flashing in the title bar of the cues view and in the
turned on in the timecode configuration
showed grayed out and the timecode trigger icon is displayed in red.
Figure 3: Cues View - No timecode source is turned on in the Timecode Configuration Window
To open the executor settings, tap the tool
To pin the view and deactivate the dynamic view mode, tap on the pin
Below the title bar is the cue table. In this table you can edit the
Number. The edit cue number(s) window
Cue Name
Protected
Trig (Trigger). The
Trigger Time
Fade
Delay
Out Fade
Out Delay
Preset Type Timings
Cmd (Command)
Snap Percent
Info
To edit the cells of the cue table, press and hold the cell. The corresponding edit window opens.
A selected cell in the cue table has blue background with a white frame around.
The current executed cue in the cue table has a green background.
The blue bar in the name column of a running cue displays the fade time from 0% to 100%.
For more information about cues, refer to
If a cue is set to protected, a white line is displayed to see where the tracking stops. For more information, refer to
What is Tracking?
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
window. If no timecode source is turned on, the TC Record button is
in the title bar. It opens the
opens.
select trig window opens.
What is a Cue?
executor bar. Only available if at least one timecode source is
settings of executor
in the
and How to work with
window.
title bar.
Cues?.
is
253 of 614