MA lighting dot2 User Manual page 419

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
Group/Grand Master:
A group or the grand master is less than 100%. Refer to
Physical Setup and
Highlight:
The highlight mode is on. Refer to,
Solo:
The Solo is on. For more information see the
Missed Stations:
A previous available station is missing. Double-check the connected devices in the
IP Conflict:
Two consoles with the same IPv4 address are available. Change the IP address.
Speed 1:
Master speed is on. To turn the master speed off, refer to
Rate 1:
Master rate is on. To turn the master rate off, refer to
Exec Time:
Executor time is used. To turn the exec time to 0.0 s, refer to
Prog. Time:
Programmer Time is used. To turn the programmer time to 0.0 s, refer to
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Layout.
Highlt (Highlight)
Solo
Empty Executor window
Key.
Command.
Magic Speed window.
Magic Speed window.
Magic Speed window.
Magic Speed
and Getting Started Guide - 2
Network Setup.
window.
419 of 614