MA lighting dot2 User Manual page 322

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
This makes sense, if you need to add one more fixture on an executor what does exactly the same as another
fixture.
15. Export all Executor to USB:
A shorted version of the cues view of all executors will be exported to the inserted USB stick as an .xml file. The
.xml files are in the folder dot2\importexport. To open the .xml file use a browser or import the .xml file in a
calculation program.
16. Export Patch to USB:
The console asks to enter the file name. Export a shorted version of the patch & fixture schedule to the inserted
USB stick as an .xml file. The .xml files are in the folder dot2\importexport. To open the .xml file use a browser or
import the .xml file in a calculation program.
17. IfActive:
Selects only fixtures in the
18. if output:
Selects only fixtures in the
19. IfProg:
Selects only fixtures in the
20. Invert:
Enters the Invert Command
21. Knockout Invert:
Inverts at fist the selection and removes the inverted selection from the programmer.
This is useful if you have a lot of values in the programmer but you want to store only the current selected values.
Figure 6: Fixture selection and values before knockout invert
Figure 7: Fixture selection and values after knockout invert
22. Knockout Selection:
Deselects the selected fixtures in the
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
fixtures view, if they have active programmer values. Refer to,
fixtures view, if they have a dimmer value bigger than 0.
fixtures view, if they have values in the programmer. Refer to,
in the command line.
fixtures view and remove their values from the programmer.
What is a Programmer?
What is a Programmer?
322 of 614