Error Messages - MA lighting dot2 User Manual

dot2 User Manual - Error Handling
Version 1.5 – 2018-11-29
English

9.4. Error Messages

If the following error messages do not solve the problem, please call or send an email to the tech support. See the
email address in the footer of this web page.
Phone: +49 5251 688 865 27
Phone for emergency services only: +49 5251 688 865 99 (Use this hotline only if troubles occur shortly before an
upcoming event.)
Error
# 0 Unknown error
# 1 Unknown
command
# 2 Input too long
# 3 Illegal character
# 4 Command not
implemented
# 5 Number expected The console expects a number.
# 6 IP expected
# 7 Number too large The number entered is too large.
# 8 Number too small
# 9 Number too large
# 10 Expected
# 11 Expected
argument
# 12 Expected name
# 13 Illegal name
# 14 Object does not
exist
# 15 Object not
accessible
# 16 Resize forbidden It is forbidden to resize the command entered.
# 17 Delete forbidden It is forbidden to use the command Delete to delete an object.
# 18 Create forbidden Is is forbidden to use the command Create to create an object.
# 19 Illegal range
# 20 Cannot leave
current destination
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Reason
There is an unknown error in the console.
The command entered is unknown.
The command entered is too long.
The command entered is illegal.
The console does not support the command entered.
The console expects an IP address.
The number entered in the command is too small (minimum 1
character).
The number entered in the command is too large (maximum 1
character).
The console expects more input.
The command entered is missing an argument.
The console expects a name, for example if the
was canceled.
The object name entered is not allowed. Use English characters
only.
The object you tried to work with does not exist (for example if you
tried to assign a function to an executor without any cues stored).
The object entered is not accessible.
The value entered exceeds the range of the value allowed.
You cannot leave the current destination as this may cause a multi
user conflict.
command Label
580 of 614