MA lighting dot2 User Manual page 66

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - How to...

Version 1.5 – 2018-11-29

Create a Group Master

You can create group masters on your executor faders. These can be used to limit the output of the fixtures

stored on the group master. The limit works proportional. Meaning that if you have a group master at 100% with

your fixture at 50% and you then turn the master down to 50%, then your fixture will output 25%. If a fixture is

limited by one group master, then this will limit the output no matter if it's turned up by a different group master.

It's a lowest takes precedence principle.

1. Select the fixture(s) you want on your group master.

4. Press one of the keys associated with the executor where you want the group master.

Table of Contents