MA lighting dot2 User Manual page 543

dot2 User Manual - Commands
Version 1.5 – 2018-11-29
English
To apply and leave the window,tap Ok .
To apply and get a detailed report, tap Ok Create Report .
Preset 4 "Singer" is replaced with preset 5 "Piano" if it was used on executor 2.
Example 2
Let´s assume, you will replace fixture 1 with fixture 2 if it is used on executor 1.
Press + Move
Replace Fixture 1 With Fixture 2 If ExecButton 1.1
The console gives you an overview about how many objects will change and asks, to confirm the replace
operation.
To apply and leave the window,tap Ok .
To apply and get a detailed report, tap Ok Create Report .
Fixture 1 is replaced with fixture 2 if it was used on executor 1.
Example 3
Let´s assume, you will replace group 1 with group 2.
Important:
Replace group will not replace the group in the groups view.
It will replace the fixtures using in the group in the show file. This is the same as replace fixture with
fixture.
There are two ways to do this:
a) Press +
b) Open the groups
Group 2 Please
The console gives you an overview about how many objects will change and asks, to confirm the replace
operation.
To apply and leave the window,tap Ok .
To apply and get a detailed report, tap Ok Create Report .
All fixtures stored in group 1 are replaced with the fixtures stored in group 2.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
(=Replace) Fixture 1 Move
Move (=Replace) Group 1 Move
view. Press + Move
.
(=With) Fixture 2 If
(=With) Group 2 Please
(=Replace), tap at Group 1 , press
, press executor button 1
.
Move (=With), tap at
.
543 of 614