MA lighting dot2 User Manual page 403

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
If MIB is activated, MIB will be preposition attributes of fixtures that are fading in from zero. The preposition will
be activated before the dimmer is fading in from zero.
Example MIB on:
There are two cues. Cue 1, fixture 1 is set to full; Cue 2, fixture 2 is set to full with pan/tilt position.
If you start cue 1, fixture 1 opens the dimmer to 100 % and fixture 2 will be prepositioned. If you start cue 2, only
the dimmer of fixture 2 opens to 100 %.
Figure 2: Values of cue 1 with active MIB late
Hint:
If you want to deactivate MIB late only for several fixtures on the executor, store these fixtures in the
previous cue with dimmer values of 1.
Autostart
Hint:
Use autostart and autostop in fader executors only.
To disable autostart, tap the check mark.
If autostart is enabled, the executor turns on as soon as the fader is above 0.
If autostart is disabled, the executor stays turned off as soon as the fader is above 0.
Autostop
To activate autostop for the executor, tap the prohibition sign.
If autostop is enabled, the executor turns off when a fader position of 0 is reached.
If autostop is disabled, the executor stays on when a fader position of 0 is reached.
Use Master Speeds 1-4
To select a master speed for an executor, tap
If an executor uses master speed, the master speed fader controls the speed of effects in cues and chasers for
this executor.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
of Master Speed and a drop-down box opens.
403 of 614