MA lighting dot2 User Manual page 521

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - Commands

Version 1.5 – 2018-11-29

, and the respective executor button

On Exec 1 Please

, and tap the respective executor button in the

Executor 1 is on.

Let´s assume, you will turn on executor 1 with a fade time of 2 seconds.

On Exec 1 Time

Executor 1 will go on with a fade time of 2 seconds.

Let´s assume, you will turn on all normal executors with a cue list on the current page.

On Thru Please

All normal executors with a cue list on the current page are turned on.

Let´s assume, you will activate all values from fixture 1 thru 10 in the programmer.

There are two ways to do this:

On Fixture 1 Thru 10 Please

b) Select fixture 1 thru 10 in the fixtures view and press twice

All values from fixture 1 thru 10 are active in the programmer.

Let´s assume, you will active all dimmer values for the selected fixtures in the programmer.

There are three ways to do this:

c) Double press Dimmer in the

The dimmer values from the selected fixtures are active in the programmer.

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

(= PresetType)

(= PresetType) Dimmer

executor bar

Show Quick Links

Table of Contents