MA lighting dot2 User Manual page 388

Hide thumbs Also See for dot2:

Table of Contents

dot2 User Manual - Views & Windows

Version 1.5 – 2018-11-29

Figure 6: Select Function of 100mm Fader

Master: Scales the output of dimmer values from main executor.

Crossfade: Crossfades between two cues within the main executor.

CrossfadeA: Crossfades decreasing dimmer values from the main executor.

CrossfadeB: Crossfades increasing dimmer values from the main executor.

TempFader: Crossfades the cue on when pulled up, and off when pulled down on the main executor.

Master Rate: Controls the rate of the trig time, fade and delay from all executors which use the master rate.

Master Speeds 1-4: Control the speed of effects in cues and the playback speed of chasers from all executors

which use a master speed.

Prog Time: Controls the fade time of the programmer only if it is switched on.

Exec Time: Overrides the cue fade and on /off times and it also sets the cue delay to zero from all executors if it is

switched on.

Empty: The fader has no function.

For more information see

Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com

Show Quick Links

Table of Contents