MA lighting dot2 User Manual page 275

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
Example:
If you create 2 groups:
The first fixture will be added to the first group.
The second fixture will be added to the second group.
The third fixture will be added to the first group.
The fourth fixture will be added to the second group and so forth.
Blocks:
Blocks divide selected fixtures into small groups which work as an entity.
Example:
If you created a simple dimmer chase containing 10 fixtures:
Set the block value to 2.
You will then see that the fixtures one and two are moving together in the same direction.
The same principle applies to fixtures 3 and 4.
None:
The effects runs through all fixtures.
Important:
The shaded background symbolizes that Groups and Blocks are not taken over into the effect editor
when editing cues or presets.
Wings
Wings divide selected fixtures into smaller groups. These groups are mirrored.
Example:
If you have created a simple dimmer chase containing 10 fixtures. They move from left to right:
Set the wing to 2.
The first 5 fixtures move from left to right.
The next 5 fixtures move from right to left.
The fixtures move in sync to one another.
1. Select fixtures.
2. Press Effect
3. Choose an effect.
4. Tap Phase and the calculator EffectPhase opens.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
.
275 of 614