MA lighting dot2 User Manual page 406

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
Cue Zero
To activate cue zero for the executor, tap the prohibition sign.
If cue zero is on, the dot2 creates an invisible cue zero on this executor.
The cue zero stores the default values of any attributes which are used in any cue on this executor.
If cue zero is on, any attributes which are used in any cue on this executor will have their default values in
addition to the values of the current cue.
For more information about tracking refer to
Example Cue Zero On:
Let´s assume you have stored fixture 1 thru 3 in blue at executor 1.
In cue 1 of executor 2, fixture 1 is stored in red.
In cue 2 of executor 2, fixture 2 is stored in green.
In cue 3 of executor 2, fixture 3 is stored in green.
Cue zero is on for executor 2.
Starting executor 1 will display three fixtures in blue.
Figure 5: Fixture 1 thru 3 blue
Starting cue 1 of executor 2 will display fixture 1 in red.
Fixture 2 and 3 have their default values since they are used on executor 2 in cue 2 and cue 3.
Figure 6: Fixture 1 red – cue zero on
Example Cue Zero Off:
This is the same initial situation as in example cue zero on.
Starting cue 1 of executor 2 will display fixture 1 in red.
Fixture 2 and 3 keep the values from executor 1.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
What is Tracking?
406 of 614