MA lighting dot2 User Manual page 355

dot2 User Manual - Views & Windows
Version 1.5 – 2018-11-29
English
Buttons in the Schedule
Rightmost of the window are five buttons.
Figure 3: Patch and Fixture Schedule buttons
Add New Fixture Window:
Tap to open the Add New Fixtures
Create Multipatch:
Tap to open the Calculator. Enter the amount of multipatch fixtures.
Multipatch create additional row to patch several DMX addresses for the selected fixture in the Patch and Fixture
Schedule. It is used to control several DMX addresses by using one fixture ID in the console. The multipatch
fixtures are doing all the same, indicated by the same fixture ID. The multipatched fixtures are visualized in the
dot2 3D. For more information see
Change Fixture Type:
Tap to change the selected fixture type. The
Important:
Changing fixture types to fixture types that have more DMX channels does not delete the old patch,
instead it displays the invalid patch addresses in red. For more information see
delete fixtures.
© 2018 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Window.
dot2 3D - 3D objects.
Select Fixture Type... Window opens.
Add, patch, change, and
355 of 614